The Interior DIYer
Uncategorized

DIY Friday – holiday memory boxes

Back in June I had a chance to sit down and chat with the lovely Sarah from Organised Chaos for Image Interiors & Living. I can’t spill the beans on everything we spoke about [you’ll have to check out the September / October issue that comes out in two weeks, woop!]. I immediately felt at ease chatting with Sarah about a whole spectrum of organising and decluttering. In fact I may have gotten a tad over zealous. After all, it’s not every day I can talk so openly and excitedly to someone about hangers for 10 minutes without them giving me stink eye in return. 

One storage solution Sarah mentioned briefly during out chat was her holiday memory boxes – she suggested people invest in pretty boxes to put their holiday souvenirs, trinkets, and memories into. It’s a great way to keep your ticket stubs, sea shells, and maps from eating into your everyday storage and tumble-weeding around your house as well as giving them a defined space. I thought this idea was phenomenal. Husband and I have done quite a bit of travelling over the past couple of years [23 countries, to be exact], and not to mention I’m a bit of a memory hoarder. Bus tickets, metro tokens and the likes. Since June I couldn’t stop thinking about Sarah’s holiday boxes, so I couldn’t resist making her brilliant idea into this week’s DIY Friday …

First up, I’d suggest assessing how much you have that needs to be stored. There’s not much point in going out and buying boxes first, then realizing they’re too small for the souvenirs you have. So what I did was spread out all my travel souvenirs then hit the IKEA website. I didn’t want anything too naff, but at the same time, they’d essentially just be storage boxes so I didn’t want to pay too much. Affordable and easy on the eyes. 

It didn’t take long before I saw the black KASSETT lidded storage boxes, and at €2.25 for two boxes [yeah, that’s €1.12 per box], I’d be crazy not to. They were the perfect size, 26cm long x 16cm wide, aka the size of an A4 page folded in half. Perfection. Bus. IKEA. Bus. Assembly in front of the TV.

I wasn’t in love with the label tabs that came with the KASSETT boxes, and I was also dying to put my Dymo Omega label maker to good use. But my label tape is black, and my new boxes are black, so they won’t stand out! Talk about first world problems. So what did I do? I spray painted the label tape with my go-to Montana paint in ‘winegum’, punched out the words, then lightly sanded the letters to bring up the white lettering. Bingo. Bespoke labels. 
[PRO TIP – the shiny label tape works best vs. the mat label tape]. 

Sarah suggested storing the holiday memory boxes in a neglected shelving area in your home. To help beautify the space as well as make use of an otherwise neglected storage area. For the moment I have our holiday memory boxes on the shelves in our bedroom, but that won’t be their final destination. 
All hail Organisation Expert Sarah.

Uncategorized

#PicadoMexican – retail details

A couple of weeks ago I shared a plethora of photos of the newly completed #PicadoMexican pantry. As there was so much involved in the project, I wanted to break down the details into 3 parts detailing the different sections of the shop – the retail section [that’s where you are now!], the kitchen, and the pay and display. I wanted to share the good, bad, and the mostly awesome roller coaster ride and design process that made #PicadoMexican what it is today. So let’s get stuck into the details, shall we? 

To give you a recap, this was my original design proposal …

NOTE: 1-4 are kitchen details and will be shared within the next 2 weeks.

5. Since the security shutters could only be installed within the shop, they in a way acted as a separation between the shop and the window display. We’re making this space work to our advantage! 
6. Lily and Alan had 10 industrial crates made for their My Mexican Shop market stall. We reused these as mini display cabinets to add another level of shelving as well as storage units. 
7. Some industrial style shelving was added to the space for displaying the main food products and ingredients. My original plans for this area fell through, but it just meant I had to come up with something better. More details on these will be detailed below … 
8. It was important for me to incorporate pieces Alan and Lily used throughout their market days, so I upcycled a vintage dresser of theirs and incorporated it into the shop as a display piece and as extra storage. 
9. The main floor space will be doing double duty – a table will serve as a display area and in the evenings during Lily’s cookery courses, will serve as a prep and an om nom nom area. 
And here’s how we incorporated the above into the retail section. Well, as best as we could. There were some hiccups design challenges, but we were well up for it … 

Lily and Alan’s vintage dresser was something I wanted to incorporate into the design. I felt it was important to carry through some roots from their pantry and market stall beginnings. The vintage dresser wasn’t a family heirloom of theirs so they were more than happy for me to repaint it. This beast of a dresser is quite a solid piece and was used as a display cabinet back in the day, so it didn’t stray far in Picado. I couldn’t not incorporate it into the design. 
I sanded it down and wiped the dresser before applying 3 coats of Annie Sloan’s pure white chalk paint. I removed the existing hardware and replaced them with stainless steel EKEBODA handles from IKEA, which not only fit in with the industrial slant we were taking, but they’re the same handles that were used on the kitchen cabinets which [I like to think] subtly link the two spaces together.

As for the main storage, I was originally hoping to construct a set of pipe shelves. But as it turns out, pipe accessories are hella expensive here in Ireland compared to all those North American tutorials I drool over endlessly. With each piece costing upwards of €8.50, that option was quickly ruled out. I was in B&Q at the time so I voiced my concerns to one of their hardware specialists. I told him a bit about the industrial look we were going for, “…kinda like these industrial shelves used to display stuff here in B&Q …”, as I stared up at the ginormous shelving all wide-eyed. He pointed me in the direction of their 5 tier galvanised boltless shelves, and I ran.

The galvanised shelves met everything we were looking for. They were the perfect size for two shelves to flank either side of the vintage dresser and they were well within budget. There was however one minor detail I was a bit concerned with – the thickness of the shelves. The label said the shelves could take 65kg per shelf, but the metal shelves themselves were a bit warpy and would pop up and down in the centre. You know, and make that loud flexing metal sound? The majority of #PicadoMexican‘s products were in glass bottles or tin cans, and I was concerned that such dense items would warp the shelves. So to give them some extra stability I suggested adding chip board to strengthen and evenly distribute the weight. Alan’s dad expertly cut and stained the planks of chip board to fit each shelf which also added to the industrial look, and tied in with the wooden top of the vintage dresser. Weight now evenly distributed = winning. And it looks good? Winninger. 

Then there was the floor – this is something I don’t think I can describe to you without using a lot of hand gestures, but I will try my best. You see, the floor in #PicadoMexican was a curious floor indeed. 1/3 of the floor was completely level, aka. the kitchen, but the area between the kitchen and the front door, the floor sloped in an unruly way. Not only did the floor slope away from the walls, it also sloped towards the front door. It sloped in not just one, but two directions. Meaning, if you emptied a bag of marbles across the back of the shop, they’d all end up at the front door. Okay, that may sound a tad dramatic, but it was enough of a slope to notice. Hopefully my terrible diagram will make a little more sense … 


It meant that when we first assembled the shelves and put the base of them against the wall, the top half of the shelves were tilted away from the wall, as well as sloping down to the left. I burst into a cold sweat. I went home that night a failure. How was I going to fix this? I came up with all sorts of wild ideas, most of which involved anchoring the top of the shelves to the wall, and some of which involved me attacking things with a saw. We couldn’t have shelves teetering all over the shop in case [god forbid] someone knock into them, the shelves and their contents would collapse on top of them. I would literally have blood on my hands. To say I lost sleep over it was an understatement. 

Then one morning I woke up at 3am with a solution – build a tiny step / ramp / deck that will level off one side of the shop that the vintage dresser and shelves can sit on. It seems wildly obvious to me now, but at the time it was a real case of not being able to see the forest through the trees. I passed the details onto Lily and Alan’s carpenter, Allen, and his mad carpentry skills produced this bad boy. It is perfection and I nearly cried at his skills and if it’s not too conceded to say, my being able to solve the problem. I conquered the sloping floor before it conquered me. And it very nearly did. 


So those are our little stories behind the design process the retail section went through to get to where it is today. Check back next week when I’ll be sharing details and pictures for the kitchen section of #PicadoMexican! 

xx A

Uncategorized

Step stool saga

Last week I wrote about my new step stool combo and how I wanted to coordinate my BEKVAM stool with my salvaged skip stool in a way that would fit in with our living room a little better. To give you some history, long ago I found this broken bar stool in a skip, cleaned it up and repainted the top black. When I bought our new BEKVAM stool a couple of weeks ago, I saw their potential and was prompted to give them both a little makeover. 

I did a lot of head scratching and googleing of IKEA hacks and I eventually decided to paint them light grey with black dip-dye legs. I like the dip-dye trend that all the cool people are trying out these days so I thought I’d try it for myself. And it looked meh. 

There are a couple of factors to consider here –

  • You can’t really tell from the above picture, but our / our landlords 10-year-old IKEA shelving is what I like to call IKEA ‘white‘. Which in fact is not white. Hence the italics and quotation marks. The shelves are a light shade of cream. So anything that isn’t progressively more yellow than them looks blue. Meaning, the light grey paint on the stools looks blue in front of the yellow, I mean white, shelves. 
  • The grey just wasn’t dark enough so while clashing with the shelves, the stools also blended into the background as well. Do you remember those eye puzzle posters that were huge in the 90’s? You’d stare at them and then all of a sudden a 3D image would pop out? That’s what happened to my stools when they were this colour. You didn’t really see them but once you do, you feel like reality has been altered ever so slightly. Not what I was going for. 
So back to the drawing board. I knew I wanted to go darker, but I didn’t want to go black. I went to my local hardware store, saw the Dulux Exterior SatinWood paint in ‘iron clad’ [sorry, no direct linkage available], and I couldn’t resist trying it out. Yes, it’s paint meant for front doors and the likes but I’ve got to say, this paint is kind of amazing. 

A couple of you had asked what I was hoping to use our new BEKVAM stool for. It’s really just to replace something else. I used to have a miniature chest in that spot [which you can see here] which as a secondary function housed all my extra yarn. I was getting tired of it and wanted something fresher, so I upgraded to the BEKVAM stool. “What an odd place to have a stool / miniature chest“, I hear you say. Well I haven’t let you in on its primary function as it’s there for one reason. Well, for two furry reasons. See that pinkish-lilac cushion up in our shelves? That’s one of Juniper and Toshi’s favourite cubbies and in order for them to climb into it, they need some assistance …  

Yep. I have a stool for our cats. I of course actually use the step stool, but while it’s not being used by humans, our cats get full use of it. p.s. I can’t handle how cute and curious Juniper looks in this picture. It’s like she’s inspecting my painting skills.

I’m so glad I used this paint as it dries so fast. I was able to paint two coats on both stools in an hour and that’s including drying time. They have a lovely satin finish and aren’t tacky to the touch like some paint can be. In fact, I was so enthusiastic that I repainted our entire bedroom dresser in it this morning. From start to finish with two coats of paint and dry within an hour. That’s what I’m talkin’ ’bout.

I know this makeover isn’t a monumental change to our living room, but it’s a little step. xx A