#Shedspiration

Last week I accepted my third project / challenge with Woodie’s. And it was a good one. It was all about creating #Shedspiration.

THE BRIEF – transform a typical garden shed into a haven for gardening and tool accessories, with organisation and storage being the primary focus. Challenge accepted, twirling with arms wide open in a field full of tulips. Styling a small space for optimal storage? Relax, I got this one, guys.

First, I chose a colour for the shed to be painted. I went with Cuprinol’s warm yet neutral ‘Pale Jasmine’, and the interior walls got one coat of paint. I then defined the three work areas – a mini gardening area for re-potting and the likes, a hardware station to draft up DIY ideas, and a small area to chillax over a cup of tea and a cheeky biscuit [or three] while surveying all of your hard work. 

Using large storage crates as a base, I created the foundations for the two work stations and added large wooden shelves as the worktops. [I should state that for the hardware side, this station is NOT suitable for using large power tools on. This station is suitable for storing tools, drawing up plans and for working on smaller projects. A proper work bench is necessary for using power tools, but you guys know that already. I just have to put it out there]. 
I used the walls to my advantage and hung up as much as I could, including a shelf over the hardware station for the smaller and more used tools and hardware accessories. 

I kept the palette very neutral [yet snuck in two hits of my favourite berry hue] when styling and adding character to the shed, and I stayed away from using specific brands as much as possible, to keep it all neutral and middle of the road and open minded. Every item you see in the shed is available in Woodie’s, so if you see something you like, head to your local branch! 

I had particular fun with the signs – Laura had suggested a few cheeky and inspirational phrases, so I ran with the idea and designed some bespoke super simple Woodie’s-style posters to place in the shed. My favourite being “IN CASE OF ZOMBIES. OR YARD WORK.” perched among the garden tools. 

A huge thank you to all the staff in Woodie’s Blanchardstown for letting me make a nest in your shed for an entire day, and for all your help / not judging me too much with my questions and statements [“Don’t worry, I’m not stealing this … Is that shed sealed and/or moisture proof? … I’m just bringing all this stuff into the garden section … How many trolleys do you have in this branch? … Could you reach that for me? I’m vertically challenged” etc.] 

I had possibly way. too. much. fun creating and styling this shed. I really felt like the Emily Henderson of sheds by the end of it. 

Check out my other projects with Woodie’s – Valentine’s day trayMother’s Day string art

DIY drip feature wall

Ever since I installed the drip wall for the Localise Youth Room at Sophia House, I’ve wanted to incorporate a drip feature into our apartment. And as is typical around here, a year+ went by. 

For husband’s birthday in January of this year, I got him a guitar hook thingy to display his Stratocaster. There it perched on our living room wall between the hall door and the kitchen all lovely for a couple of months, but I had wanted to add a little something else to the wall to make it pop. And that’s when I had my lightbulb moment.

The guitar is in fact centred, but because it hangs about 5 inches away from the wall, it looks off-centre in some pictures. And it’s driving me a little bit insane. Especially in the first picture. The drip feature is centred! Please believe me!

What you’ll need … 
– paint, either wall paint or guache DO NOT USE GUACHE PAINT. See my revised post here about why you should use appropriate wall paint.
– water [I added about a tablespoon of water to every 100ml of paint, then shook it up]
– drop cloth to protect your floor, just in case
– a bottle with a resealable nozzle lid 

The most important item you’ll need [other than paint] is a bottle with a resealable nozzle lid, like the one above. You could use an empty washing-up liquid bottle, sports drink, water bottle or kids drink, as I did here. The reason the nozzle is so important is because it allows you to get right up to the wall to squish out the paint without spilling paint everywhere, and it also gives you control over the speed in which the paint is applied. It doesn’t seem like rocket science, but this technique took a lot of brain storming back when I made the multi-coloured wall

I used black guache paint for our wall. I originally was thinking of using one of my favourite red berry hues, but then I was all like, “hold up. You can’t do that. You can’t have red paint dripping down the wall. It’s going to look like the walls are bleeding. No one will ever want to visit your apartment or trust you with sharp objects ever again.” So I decided to skip my signature colour for this project. 

And here’s how to do it – first you’re going to need to decide where you want your drips to start. I wanted the drips to start appearing half way down the wall / behind the body of the hanging guitar. Holding the bottle carefully, start glooping the paint in spots on the wall. This is very much less is more until you get a feel for how runny the paint is. Remember – you can always add more paint; it’s not so easy to take it back.

TIP: do some practice drips higher on your wall first, like you’ll see I did below. It’ll get covered in paint, so you won’t see it. 

When you’re happy with the amount of drips you have, your wall will more than likely look like the below; a bit ghetto. This is okay. Take a paint brush, and using the excess gloops of paint on the wall, start painting in a panel above the drips to collect it to the ceiling. I ended up adding a few more drips along the sides closer to the ceiling to make it look more random.

Your drips are going to look rank until they dry. You just have to accept this. But trust me, they’ll dry perfectly. It took around 18-20 hours for the paint to completely dry. 

I was quite happy with how it turned out, but I wanted to see husbands reaction [who, for the record, had no notion of my drippy plan]. He came home from work, walked around the living room a bit telling me about his day and all of a sudden he WOAH-ed when he saw it and sang its praise. He’s mentioned a good few times about how much he likes it since, so mission accomplished I’d say. 
Oh, and for anyone curious about removing it, I don’t see it being any more difficult than painting over a chalkboard wall; sand it in places then 3 coats of paint should do the trick.

But more importantly, if you can see past the fact that I did our drip wall in black, I can easily see a drip feature being done in a buttercup yellow or dainty pink for a kids room, or a strong navy blue for a quirky impact in a bathroom. And may I suggest adding ‘redrum’ to your doors if you’re going to go down the red route. 
Happy dripping! 

Mother’s Day string art

A couple of weeks ago Woodie’s set me the challenge to create a project for Mother’s Day that was quick, easy, would make a statement and also consisted of supplies found in Woodie’s branches nationwide. Challenge accepted.

A project I had filed neatly away in my brain for such an occasion was a, dare I say old school, string art tutorial. It was perfect as it required only a handful of supplies, all of which could be picked up from your lcoal Woodie’s. And even better, it’s a simple tutorial so you don’t need to be a DIY expert to make it [remember, nothing tugs on heart strings quite like imperfection].

Onto the good stuff! Here are the items from Woodie’s I used for the string art …
– a piece of wood shelf board [800 x 300 x 16mm], cut to a square
– a pack of 20mm masonry nails
– Dulux tester pot in whatever colour you like*
*I originally planned on painting this project in a shade of turquoise, but as we were going to be working with a green screen during filming in parts, green or blue was a no-no. So purple it was! 

Items you’ll also need …
– a saw to cut the wood shelf
– a hammer
– scissors
– a pencil and a piece of paper to draw your template
– tape to hold the template in place
– a paint brush

Now I’ma show you how to make it in 6 seconds. Ready? Prepare your retinas for my stop motion video debut … 

I think JP Prewitt would be proud.

I worked alongside a truly cool and down to earth team at Agtel on this Vine for Woodie’s. It took us just over 3 hours [plus 2 hours prep] to put this little gem together. It was my first stop motion video experience so it was very surreal and exhilarating to see the video come together one frame at a time. I was exhausted by the time I got home, but so excited to see the finished piece. Hats off to Agtel. You guys are magic. 

I showed my parents the Vine as soon as it went live and it turns out my dad used to make and sell string art! Albeit incredibly more complex pieces. I’m assuming before my time because I don’t remember seeing my dad make any. I do remember a couple of pieces over the years, but unless you’re told “that was made by dad!“, you just don’t know. My future children better brace themselves. They about to get schooled.

So there you have it! I hope you enjoy our little video, and to all the mothers out there – both human and fur baby variety – happy Mother’s Day this weekend xx

p.s. I’m now on Vine! I haven’t a clue how to use it, so we’ll see how much I use it. So far I’ve done the equivalent of retweeting.